TOUCH-SCREEN, ICON-BASED patented system. Parametric programming. Up to 1.000 working programs storable. Job-lists and macros."Office Creator" PC-license. Free-of-charge software upgrades to get a top-performance always!
Configurable equipment to meet Your needs. Max working-field width 800 mm (with any spindle and all over the panel surface). Through-feed working cycle or back to the operator.
The fastest in its category. Zero-time set-up. Axis speed 25m/min (full-load) and 40 m/min (no load). All working operations in one cycle. The horizontal concept of the machine makes it easier for the operator to load the working pieces. 4 times faster than a single-head boring machine.
Drilling from above and panel-edge reader ensure the accuracy of the drilling process.
Gentle brushes on the working table prevent the working panels from scratches and avoid the storage of dust and shavings.
It is not required to have a dust-extraction plant to work with the machine. All You need is a dust-collector having an air flow capacity of Q = 750 m3/h.
Intuitive, Icon-based interface, step-by-step data enter and simulation program. It abides by all requirements for the 4.0 INDUSTRY. Quick selection and execution of part programs. Job-lists and wide range of macros. Parametric programming. "Office Creator" PC-license. Direct import of the most common 3D-CAD file formats such as: (-stl, -stp, -iges, -obj, -skp) and 2D files in (-dxf,-dwg )format. Import of entire 3D projects in (-dxf 3D) format, developped on a cabinet software, is also possible, by using a simple decoding software . Free-of-charge software upgrades to get a top-performance always!
Configurable equipment to meet Your needs. Max working width 800 mm (with any spindle and all over the panel surface). Max. panel weight 70 Kg to process heavy kitchen tops and out-of-standard working pieces. Through-feed working cycle or back to the operator.
Zero-time set-up. 5 times faster than a single-head boring machine and the fastest in its category. Axis speed 25 m/min (full-load) and 70 m/min (no load). All working operations in one cycle. The horizontal concept of the machine makes it easier for the operator to load the working pieces. Fast execution of programs through a bar-code reader.
Large and solid working tables provide the greatest stability to the workingpiece and the laser panel-length detector ensures the highest drilling accuracy.
The air-flotation working tables make it easier for the operator to position heavy panels and prevent them from scratches.
The solid structure, made of steel and built to withstand intense work and heavy-duty tasks, the well-dimensioned pneumatic clamp, suited to handle panels up to 70 Kg, and the double hold-down clamps; combined with highly accurate mechanics, brushless 1kW motors and rolling guides, make this machine always as accurate as the first day.
N.2 , 120 mm diameter, and N.1, 80 mm diameter, dust-collection nozzles ensure effective dust collection, even during the most demanding routing operations. Dust-collectors having an air flow capacity of Q = 750 m3/h are suited.
Intuitive, Icon-based interface, step-by-step data enter and simulation program. It abides by all requirements for the 4.0 INDUSTRY. Quick selection and execution of part programs. Job-lists and wide range of macros. Parametric programming. "Office Creator" PC-license. Direct import of the most common 3D-CAD file formats such as: (-stl, -stp, -iges, -obj, -skp) and 2D files in (-dxf,-dwg )format. Import of entire 3D projects in (-dxf 3D) format, developped on a cabinet software, is also possible, by using a simple decoding software . Free-of-charge software upgrades to get a top-performance always!
Configurable equipment to meet Your needs. Max working width 1000 mm (with any spindle and all over the panel surface). Max. panel weight 70 Kg to process heavy kitchen tops and out-of-standard working pieces. Through-feed working cycle or back to the operator.
Zero-time set-up. 5 times faster than a single-head boring machine and the fastest in its category. Axis speed 25 m/min (full-load) and 70 m/min (no load). All working operations in one cycle. The horizontal concept of the machine makes it easier for the operator to load the working pieces. Fast execution of programs through a bar-code reader.
Large and solid working tables provide the greatest stability to the workingpiece and the laser panel-length detector ensures the highest drilling accuracy.
The air-flotation working tables make it easier for the operator to position heavy panels and prevent them from scratches.
The solid structure, made of electro-welded steel and built to withstand intense work and heavy-duty tasks, the well-dimensioned pneumatic clamp, suited to handle panels up to 70 Kg, and the double hold-down clamps; combined with highly accurate mechanics, brushless 1kW motors and rolling guides, make this machine always as accurate as the first day.
N.2 , 120 mm diameter, and N.1, 80 mm diameter, dust-collection nozzles ensure effective dust collection, even during the most demanding routing operations. Dust-collectors having an air flow capacity of Q = 750 m3/h are suited.
Intuitive, Icon-based interface, step-by-step data enter and simulation program. It abides by all requirements for the 4.0 INDUSTRY. Quick selection and execution of part programs. Job-lists and wide range of macros. Parametric programming. "Office Creator" PC-license. Direct import of the most common 3D-CAD files ( option) in -stp, -iges, -obj, -skp formats and 2D files in -dxf,-dwg formats. Direct import of entire Cabinet projects is also possible, by using a simple decoding software ( optional) . Free-of-charge software upgrades to get a top-performance always!
Configurable equipment to meet Your needs. Max working width 1200 mm (with any spindle and all over the panel surface). Max. panel weight 70 Kg to process heavy kitchen tops and out-of-standard working pieces. Through-feed working cycle or back to the operator.
Zero-time set-up. 5 times faster than a single-head boring machine and the fastest in its category. Axis speed 25 m/min (full-load) and 70 m/min (no load). All working operations in one cycle. The horizontal concept of the machine makes it easier for the operator to load the working pieces. Fast execution of programs through a bar-code reader.
Large and solid working tables provide the greatest stability to the workingpiece and the laser panel-length detector ensures the highest drilling accuracy.
The solid structure, made of electro-welded steel and built to withstand intense work and heavy-duty tasks, the well-dimensioned pneumatic clamp, suited to handle panels up to 70 Kg, and the double hold-down clamps; combined with highly accurate mechanics, brushless 1kW motors and rolling guides, make this machine always as accurate as the first day.
N.2, 120 mm diameter, and N.1,80 mm diameter, dust-collection nozzles ensure effective dust collection, even during the most demanding routing operations. Dust-collectors having an air flow capacity of Q = 750 m3/h are suited.
Thanks to the 1.088 mm interaxis and the large working table, You can process 2 panels having 540 mm width at the same time.
The ref. side fences, adjustable on numeric counters, always represent a precise reference point, quick to set-up, and guarantee perfect parallelism of the drilling operations.
Adjusting the boring depth is extremely easy with the "Spyral System" device and the 10 mm automatic reset for vertical drilling.
The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process.
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops.
The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence.
Made of steel, built to last, eco-friendly, rust-resistant powder coating. Boring head is made of aluminium, while internal gears are made of rectified steel.
The only model equipped with two 2HP motors, for an even more powerful and well balanced drilling
Thanks to the 704 mm interaxis and the large working table, You can process 2 panels having 348 mm width at the same time.
The ref. side fences, adjustable on numeric counters, always represent a precise reference point, quick to set-up, and guarantee perfect parallelism of the drilling operations.
Adjusting the boring depth is extremely easy with the "Spyral System" device and the 10 mm automatic reset for vertical drilling.
The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process.
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops.
The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence.
Made of steel, built to last, eco-friendly, rust-resistant powder coating. Boring head is made of aluminium, while internal gears are made of rectified steel.
Thanks to the 896 mm interaxis and the large working table, You can process 2 panels having 444 mm width at the same time.
The ref. side fences, adjustable on numeric counters, always represent a precise reference point, quick to set-up, and guarantee perfect parallelism of the drilling operations.
Adjusting the boring depth is extremely easy with the "Spyral System" device and the 10 mm automatic reset for vertical drilling.
The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process.
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops.
The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence.
Made of steel, built to last, eco-friendly, rust-resistant powder coating. Boring head is made of aluminium, while internal gears are made of rectified steel.
Thanks to the 640 mm interaxis and the large working table, You can process 2 panels having 316 mm width at the same time.
The ref. side fences, adjustable along a metric bar, with magnify glass and nonius , always represent a precise reference point for the operator and guarantee the perfect parallelism of the drilling operations.
Adjusting the boring depth is extremely easy with the "Spyral System" device and the 10 mm automatic reset for vertical drilling.
The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process.
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops, (two are included, two are options).
The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence.
Made of steel, built to last, eco-friendly, rust-resistant powder coating. Boring head is made of aluminium, while internal gears are made of rectified steel.
Having a total interaxes of 704 mm and with two boring-heads, the machine can perform a double row of parallel line holes in just one working cycle, and process a 3000 mm long side-panel in just four working cycles.
Boring depth and distance between the heads are easily adjustable with numeric counters.
N.6 quick-adjustable, pneumatic, safety clamps ensure the perfect panel hold-down, which results into always accurate drilling operations.
Thanks to the aluminum fence (3000 x 80 mm) with 4 reference stops.
Wide and solid, extendable, panel holders, both sides, giving additional support to the long working panels and easing their loading on the machine.
It considerably speeds up the vertical row drilling operations with respect to a single-head boring machine.
Made of steel, built to last. Eco-friendly, rust-resistant powder coating. Boring heads are made of aluminium, while internal gears are made of rectified steel.
It performs all the drilling operations to build up a cabinet in just two working cycles: the two vertical boring heads drill the holes for the side panels while the horizontal boring head makes the holes for the panel joints.
Quick and accurate positioning of the vertical boring-heads thanks to a pneumatic locking system, digital read-out displays and micrometric adjustment devices. Boring-depth and boring-height adjustment of the horizontal head is also easy and fast thanks to the "Spyral System" and the numeric counters.
N.2 quick-adjustable, pneumatic, safety clamps, swivelling from 0° to 90°, ensure the perfect panel hold-down, which results into always accurate drilling operations.
Thanks to N.2 reference stops with digital read-out displays and n.2 reference stops with magnify glass and nonius sliding on ball bearings along the aluminum fence (3000x120 mm).
Easy positioning of the long panels thanks to the "Cantilever" structure and to the wide and solid holding tables made of steel. The panel drive is on the front side, easily accessible for the operator.
Thanks to the quick-set-up devices and the 3 boring heads working simultaneously, it considerably speeds up the drilling process with respect to a single-head boring machine. Perfectly suited to process big-size panels.
Made of steel, built to last. Eco-friendly, rust-resistant powder coating. Boring heads are made of aluminium, while internal gears are made of rectified steel.
It performs all the drilling operations to build up a cabinet in just two working cycles: the two vertical boring heads drill the holes for the side panels while the horizontal boring head makes the holes for the panel joints.
Quick and accurate positioning of the vertical boring-heads thanks to a pneumatic locking system, digital read-out displays and micrometric adjustment devices. Boring-depth and boring-height adjustment of the horizontal head is also easy and fast thanks to the "Spyral System" and the numeric counters.
N.2 quick-adjustable, pneumatic, safety clamps, swivelling from 0° to 90°, ensure the perfect panel hold-down, which results into always accurate drilling operations.
N.4 reference stops with magnify glass and nonius sliding on ball bearings along the aluminum fence (3000x80 mm)
Easy positioning of the long panels thanks to the "Cantilever" structure and to the wide and solid panel holders made of steel. The panel drive is on the front side, easily accessible for the operator.
Thanks to the quick-set-up devices and the 3 boring heads working simultaneously, it considerably speeds up the drilling process with respect to a single-head boring machine. Perfectly suited to process big-size panels.
Made of steel, built to last. Eco-friendly, rust-resistant powder coating. Boring heads are made of aluminium, while internal gears are made of rectified steel.
Swivelling arm up to 45° left and right and left tilting cutting-head (stop and lock at 45°) allow many different cutting operations for the greatest versatility.
Sound-insulated, full-cover blade guard with safety microswitch, anti-kickback, well-dimensioned working bench and emergency button, definitively contribute to the operator safety during the cutting process.
Rugged steel construction, arm and base made of cast iron. Interchangeable, tempered-steel made guides. Cutting head sliding on 8 ball bearings for a smooth, precise and effortless carriage mouvement.
Cutting width up to 545 mm. All-around performance. Well-suited also for the hobbyist.
Well-finished, ergonomic machines.
Eco-friendly, rust-resistant powder coating.
Swivelling arm up to 45° left and right and left tilting cutting-head (stop and lock at 45°) allow many different cutting operations for the greatest versatility.
Sound-insulated, full-cover blade guard with safety microswitch, anti-kickback, well-dimensioned working bench and emergency button, definitively contribute to the operator safety during the cutting process.
Rugged steel construction, arm and base made of cast iron. Interchangeable, tempered-steel made guides. Cutting head sliding on 8 ball bearings for a smooth, precise and effortless carriage mouvement.
Well-finished, ergonomic machines.
Eco-friendly, rust-resistant powder coating.
Swivelling arm up to 45° left and right and left tilting cutting-head (stop and lock at 45°) allow many different cutting operations for the greatest versatility.
Sound-insulated, full-cover blade guard with safety microswitch, anti-kickback, well-dimensioned working bench and emergency button definitively contribute to the operator safety during the cutting process.
Rugged steel construction, arm and base made of cast iron. Interchangeable, tempered-steel made guides. Cutting head sliding on 8 ball bearings for a smooth, precise and effortless carriage mouvement.
Well-dimensioned machine, best suited to cut heavy wooden boards and panels. Max. cutting width up to 865 mm.
Well-finished, ergonomic machines
Eco-friendly, rust-resistant powder coating
Swivelling arm up to 45° left and right and left tilting cutting-head (stop and lock at 45°) allow many different cutting operations for the greatest versatility.
Sound-insulated, full-cover blade guard with safety microswitch, anti-kickback, well-dimensioned working bench and emergency button, definitively contribute to the operator safety during the cutting process.
Rugged steel construction, arm and base made of cast iron. Interchangeable, tempered-steel made guides. Cutting head sliding on 8 ball bearings for a smooth, precise and effortless carriage mouvement.
Well-dimensioned machine, best suited to cut heavy wooden boards and panels. Max. cutting width up to 1155 mm.
Well-finished, ergonomic machines
Eco-friendly, rust-resistant powder coating
VERSATILE
Swivelling arm up to 45° left and right and left tilting cutting-head (0° to 45° with stop and lock at any intermediate angle) allow many different cutting operations for the greatest versatility.
Sound-insulated, full-cover blade guard with safety microswitch, anti-kickback, well-dimensioned working bench and emergency button definitively contribute to the operator safety during the cutting process.
Rugged steel construction, arm and base made of cast iron. Interchangeable, tempered-steel made guides. Cutting head sliding on 8 ball bearings for a smooth, precise and effortless carriage mouvement.
7,5 HP Motor and max. cutting height up to 200 mm make this machine ideal for carrying out heavy-duty working process, like cutting of beams and/or different types of building structures made of wood.
Well-finished, ergonomic machines
Eco-friendly, rust-resistant powder coating
Swivelling arm up to 45° left and right and left tilting cutting-head (0° to 45° with stop and lock at any intermediate angle) allow many different cutting operations for the greatest versatility.
Sound-insulated, full-cover blade guard with safety microswitch, anti-kickback, well-dimensioned working bench and emergency button definitively contribute to the operator safety during the cutting process.
Rugged steel construction, arm and base made of cast iron. Interchangeable, tempered-steel made guides. Cutting head sliding on 8 ball bearings for a smooth, precise and effortless carriage mouvement.
7,5 HP Motor and max. cutting height up to 200 mm make this machine ideal for carrying out heavy-duty working process, like cutting of beams and/or different types of building structures. Very quick set-up thanks to the front lifting handle for the cutting-height adjustment.
Well-finished, ergonomic machines
Eco-friendly, rust-resistant powder coating
Swivelling arm up to 45° left and right and left tilting cutting-head (0° to 45° with stop and lock at any intermediate angle) allow many different cutting operations for the greatest versatility.
Sound-insulated, full-cover blade guard with safety microswitch, anti-kickback, well-dimensioned working bench and emergency button definitively contribute to the operator safety during the cutting process.
Rugged steel construction, arm and base made of cast iron. Interchangeable, tempered-steel made guides. Cutting head sliding on 8 ball bearings for a smooth, precise and effortless carriage mouvement.
7,5 HP Motor and max. cutting height up to 200 mm make this machine ideal for carrying out heavy-duty working process, like cutting of beams and/or different types of building structures. Very quick set-up thanks to the front lifting handle for the cutting-height adjustment. Max. cutting width up to 1.140 mm.
Well-finished, ergonomic machines
Eco-friendly, rust-resistant powder coating
3-wheel model: the ideal solution for the feeding of laths and medium or small-size workpieces. Thanks to the two infeed-wheels and the third outfeed one, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
The speed selector allows a quick set-up of the 1st and the 2nd feed- rate and the quick change of the feeding direction back and forth; while swapping the internal gears You obtain the 4 speeds.
50-Shore wheels made of patented "Feeder Grip" rubber, providing the longest durability and the highest grip on the workingpiece.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
3-wheel model: the ideal solution for the feeding of laths and medium or small-size workpieces. Thanks to the two infeed-wheels and the third outfeed one, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
The speed selector allows a quick set-up of the 1st and the 2nd feeding rate and the quick change of the feeding direction back and forth. First 4 speeds are obtained by swapping the internal gears, while replacing them with the set of gears, included in the equipment, You get the additional 4 speeds.
50-Shore wheels made of patented "Feeder Grip" rubber, providing the longest durability and the highest grip on the workingpiece.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
3-wheel model: the ideal solution for the feeding of laths and medium or small-size workpieces. Thanks to the two infeed-wheels and the third outfeed one, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
The speed selector allows a quick set-up of the 1st and the 2nd feeding rate and the quick change of the feeding direction back and forth. First 4 speeds are obtained by swapping the internal gears, while turning the gear lever You can get the additional 4 speeds easily and fast.
50-Shore wheels made of patented "Feeder Grip" rubber, providing the longest durability and the highest grip on the workingpiece.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
3-wheel model: the ideal solution for the feeding of laths and medium or small-size workpieces. Thanks to the two infeed-wheels and the third outfeed one, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
Swapping and replacing the internal gears you can obtain 16 different speeds-unique-of-its-kind! Moreover, the speed selector, on the motor unit, allows a quick set-up of the 1st and the 2nd feed-rate and the quick change of the feeding direction back and forth.
50-shore wheels made of patented "Feeder Grip"rubber, providing the highest grip, while the "SEMI-HUB" patent reduces the wear rate by 51%, and the waste material (replaceable rubber casings) for a lower impact on the environment.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, and joint are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
The transmission unit, working on bearings, has almost no internal frictions, so that the amount of energy required is consequently reduced to the minimum. Unique of its kind.
Most powerful motor in its category (1,5 Hp) and widest range of feeding rates available on the market (16 speeds).
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
Model with belts: the ideal solution for the feeding of short and/or narrowed workpieces. Thanks to the 3 toothed belts even the smallest workpieces can be transported succesfully.
The speed selector allows a quick set-up of the 1st and the 2nd feeding rate and the quick change of the feeding direction back and forth. First 4 speeds are obtained by swapping the internal gears, while turning the gear lever You can get the additional 4 speeds easily and fast.
45-Shore toothed belts made of patented "Feeder Grip" rubber, providing the longest durability and highest grip on the workingpiece.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm pulley suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
4-wheel model: the ideal solution for the feeding of wooden rods and medium and/or large-size workpieces. Thanks to the two infeed-wheels and the two outfeed ones, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
The speed selector allows a quick set-up of the 1st and the 2nd feed- rate and the quick change of the feeding direction back and forth; while swapping the internal gears You obtain the 4 speeds.
50-Shore wheels made of patented "Feeder Grip" rubber, provide the longest durability and the highest grip on the workingpiece. 4 wheels ensure even more grip on the panels, althrough the feeding process.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
4-wheel model: the ideal solution for the feeding of wooden rods and medium and/or large-size workpieces. Thanks to the two infeed-wheels and the two outfeed ones, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
The speed selector allows a quick set-up of the 1st and the 2nd feeding rate and the quick change of the feeding direction back and forth. First 4 speeds are obtained by swapping the internal gears, while turning the gear lever You can get the additional 4 speeds easily and fast.
50-Shore wheels made of patented "Feeder Grip" rubber, provide the longest durability and the highest grip on the workingpiece. 4 wheels ensure even more grip on the panels, althrough the feeding process.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
4-wheel model: the ideal solution for the feeding of wooden rods and medium and/or large-size workpieces. Thanks to the two infeed-wheels and the two outfeed ones, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
The speed selector allows a quick set-up of the 1st and the 2nd feeding rate and the quick change of the feeding direction back and forth. First 4 speeds are obtained by swapping the internal gears, while replacing them with the set of gears, included in the equipment, You get the additional 4 speeds.
50-Shore wheels made of patented "Feeder Grip" rubber, provide the longest durability and the highest grip on the workingpiece. 4 wheels ensure even more grip on the panels, althrough the feeding process.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
The only and biggest 6-wheel model in the range; the ideal solution to feed long and heavy workpieces (i.e. parts of windows and doors). Thanks to the 3 infeed wheels and the 3 outfeed ones, even the heaviest workpieces can be transported successfully.
The speed selector allows a quick set-up of the 1st and the 2nd feeding rate and the quick change of the feeding direction back and forth. First 4 speeds are obtained by swapping the internal gears, while turning the gear lever You can get the additional 4 speeds easily and fast.
50-Shore wheels made of patented "Feeder Grip" rubber, provide the longest durability and the highest grip on the workingpiece. 6 wheels ensure even more grip on long and heavy panels althrough the feeding process.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong : foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
3-wheel model: the ideal solution for the feeding of laths and medium or small-size workpieces. Thanks to the two infeed-wheels and the third outfeed one, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
A wide range of variable speeds, that You can easily select by turning a knob. The ideal solution for those who often need to change the feeding rate. The speed selector on the motor unit allows a quick change of the feeding direction back and forth.
50-Shore wheels made of patented "Feeder Grip" rubber, providing the longest durability and the highest grip on the workingpiece.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
4-wheel model: the ideal solution for the feeding of wooden rods and medium and/or large-size workpieces. Thanks to the two infeed-wheels and the two outfeed ones, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
A wide range of variable speeds, that You can easily select by turning a knob. The ideal solution for those who often need to change the feeding rate. The speed selector on the motor unit allows a quick change of the feeding direction back and forth.
50-Shore wheels made of patented "Feeder Grip" rubber, provide the longest durability and the highest grip on the workingpiece. 4 wheels ensure even more grip on the panel althrough the feeding process.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
3-wheel model: the ideal solution for the feeding of laths and medium or small-size workpieces. Thanks to the two infeed-wheels and the third outfeed one, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
A wide range of variable speeds (0,5 to 33 m/min) with electronic selection and read-out display. The ideal solution for those, who often need to change the feeding rate. By pushing a botton on the motor You can easily change the feeding direction back and forth.
50-Shore wheels made of patented "Feeder Grip" rubber, providing the longest durability and the highest grip on the workingpiece.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
4-wheel model: the ideal solution for the feeding of wooden rods and medium and/or large-size workpieces. Thanks to the two infeed-wheels and the two outfeed ones, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
A wide range of variable speeds (0,5 to 33 m/min) with electronic selection and read-out display. The ideal solution for those, who often need to change the feeding rate. By pushing a botton on the motor You can easily change the feeding direction back and forth.
50-Shore wheels made of patented "Feeder Grip" rubber, provide the longest durability and the highest grip on the workingpiece. 4 wheels ensure even more grip on the panel althrough the feeding process.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe, joint and collar are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
Well-suited to be fixed on small spindle moulders, circular saws, combined machines as well as entry-level edge-banding machines and sanders. This model is manufactured abiding by the same standards required for the professional feeding units.
The selector, on the motor unit, allows the quick change of the feeding direction back and forth. First 2 speeds are obtained by swapping the internal gears, while replacing them with the set of gears, included in the equipment, You get the additional 2 speeds.
50-Shore wheels made of patented "Feeder Grip" rubber, providing the longest durability and the highest grip on the workingpiece.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe and joint are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 15 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
3-wheel model: the ideal solution for the feeding of laths and medium or small-size workpieces. Thanks to the two infeed-wheels and the third outfeed one, the workpiece is constantly and evenly feeded althrough the working process, thus remarkably improving the quality of the end products.
Swapping the internal gears you obtain the 8 speeds; moreover the speed selector, on the motor unit, allows a quick set-up of the 1st and the 2nd feeding rate and the quick change of the feeding direction back and forth.
50-shore wheels made of patented "Feeder Grip"rubber, providing the highest grip, while the "SHS" Semi-hub patent reduces the wear rate by 51%, and the waste material (replaceable rubber casings) for a lower impact on the environment.
A power-feeder improves the safety as it feeds the workpiece close to the tool, while operator's hands are kept at a distance. Its effectiveness depends on specific design and manufacturing criteria. Maggi feeders are the only ones designed and manufactured in Italy and abiding by all EU safety norms.
For easy positioning and adjusting of the feeding unit on the machine tool. It is easy to fix, stable and strong: foot, cross-shaped piece, pipe and joint are made of cast-iron and the two columns are made of rectified steel of considerable thickness. Handles made of steel and adjusting wheels allow a quick and accurate positioning.
The 20 mm wheel suspention, with calibrated spings, allows the constand and even feeding of workpieces with different thicknesses without any additional set-up.
The transmission unit, working on bearings, has almost no internal frictions, so that the amount of energy required is consequently reduced to the minimum. Unique of its kind.
This model is manufactured abiding by the same standards required for the professional feeding units. Thanks to the small footprint and the 0,7 kw motor it performs very well on semi-professional machine tools.
Equipped with safety restraint devices (SPS - System) preventing accidental unkooks, to abide by EC safety norms.
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops.
The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops.
The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops.
The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops, (two are included, two are options).
The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.
The comb has been designed so as to have 3 fixed positions where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.
The comb has been designed so as to have 3 fixed positions where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.
The comb has been designed so as to have 3 fixed positions where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.
The comb has been designed so as to have 3 fixed positions where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.
SIMPLE, ELECTRONIC, UNIQUE
Thanks to the "touch-, icon-based", patented System, for the electronic selection of boring height, depth, boring angle, and feed rate, over a PLC; the set-up is easy and intuitive and it does not require any specific programming skills.
HIGH-QUALITY END PRODUCTS
The high-precision movement of the NC axes, driven by stepper motors and endcoder; as well as the well-balanced and even movement of the boring head, driven by a centered motor and sliding along linear guides and ball bearings, ensure an extremely accurate drilling process, and high-quality end products
QUICK SET-UP : CLICK AND GO!
Electronic selection and saving of the drilling parameters ( Up to 1.000 programs storable ) allow a reduction of the set-up time by 80%, making this machine two times faster than any other single-head boring machine of the same category.
PERFECT PANEL JOINTS
The ref. side fences, adjustable on numeric counters, always represent a precise reference point, quick to set-up, and guarantee perfect parallelism of the drilling operations.
VERSATILE
It drills at any angle between 0° and 90°. The selection of the boring angle is electronic over a touch screen
SAFE PANEL HOLD-DOWN
The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process
TOP-OF-THE-RANGE BORING-HEAD
Made of aluminium with internal gears made of rectified steel; well-dimensioned holder plate and centered motor for the highest balance, sliding on guides and sleeve bearings for an even vertical and horizontal movement to give You a top-performance, always!
FAST HORIZONTAL DRILLING
Thanks to the 640 mm interaxis and the large working table, You can process 2 panels having 316 mm width at the same time
QUICK AND ACCURATE PANEL POSITIONING
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops,( two are included, two are options)
QUICK AND ACCURATE PANEL POSITIONING
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops,( two are included, two are options)
REAR FENCE
The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence.
FIXED STOP FOR HINGES
The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.
SPECIAL DESIGN TO WORK WITH LARGE-DIAMETER DRILL-BITS
The comb has been designed so as to have 3 fixed positons where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.
FAST DRILLING OF HINGE HOLES
You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.
You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.
You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.
You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.
You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.
You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.
You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock
Thanks to the new EASY STAND ( optional ) You can tilt Your power-feeding unit in just one click : turn the handle to unlock, tilt the feeder, turn the handle again to lock