By using these quick-change tool-holders, You can mount Your drill-bits on the boring head in just "one click"

CODE: 36000061

To keep Your drill-bits and tools tidy and always close at hand

CODE: 26000014

To keep Your fences always close at hand

CODE: 26000010

It keeps long working panels aligned for a more accurate drilling process

N. 2 ref. stops to match the long panel during transversal drilling

CODE: 26001071

To increase by 1 mt the length of the 2 standard fences (1,5 mt each) and carry out the in line drilling process on long panels

CODE: 29970302

To process beams having a maximum height of 130 mm

CODE: 26001015

For an even quicker and more accurate set up

CODE: 26028819

To carry out the line vertical drilling process very quickly and accurately, without using the long fence. It is highly recommended to have this device both sides of the machine to process panels longer than 2 mt

Ref. pin for line drilling (1 piece)

CODE: 29900100

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process. It allows to process two small panels at a time 

N.2 additional hold-down clamps

CODE: 29971020

For a quick and accurate set-up of the rear fence

Ref. gauge for reaf fence parallelism ( 500 mm)

CODE: 26000061

To get one single 3mt long fence

Kit to join the two aluminium fences (1500 + 1500 mm)  

CODE: 26028820

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008395

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008391

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008392

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008393

Recommended drill-bit set for drilling aggregate for hinges, made up of n. 2 left-handed drill-bits 8mm diameter and n.1 right-handed drill-bit 35 mm diameter

Tool set made up of 3 drill-bits for hinges

CODE: 26845821

To drill the holes for the "Cabineo" connectors in one single working cycle

Drilling aggregate for "Cabineo" connectors, including 3 drill-bits 15 mm diam.

CODE: 26845820

A selection of drill-bits by our technicians for a professional approach

CODE: 26054750

To keep side fences always close at hand

CODE: 26000012

For a quick and accurate adjustment of the two side fences on the working table, to obtain the perfect parallelism of the drilling process

Gauge for the symmetry of the side fences (only for BS 21 PRESTIGE)

CODE: 26200069

For the quick and accurate adjustment of the ref. stops along the fence, when carrying out the line drilling process

Ref. gauge for the quick set-up of the ref. stops along the fence (640 mm)

CODE: 26200070

For the quick and accurate adjustment of the ref. stops along the fence, when carrying out the ine drilling process

Ref. gauge for the quick set-up of the ref. stops along the fence (896 mm)

CODE: 26001059

For the quick and accurate adjustment of the ref. stops along the fence, when carrying out the line drilling process

Ref. gauge for the quick set-up of the ref. stops along the fence (1088 mm)

CODE: 26001058

Recommended drill-bit set for drilling aggregate for hinges, made up of n. 2 left-handed drill-bits 8mm diameter and n.1 right-handed drill-bit 35 mm diameter

CODE: 26845821

To drill the holes for the "Cabineo" connectors in one single working cycle

CODE: 26845820

A click is all You need to drill the holes for the "Cabineo" connectors, in one working cycle.

CODE: 26229021

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process

N.1 additional hold-down clamp

CODE: 29971019

Having more reference points on the long fence means achieving a quicker and more precise set.up

N° 1 additional ref. stops for fence

CODE: 26010051

For the quick and accurate adjustment of the ref. stops along the fence

Ref. gauge for the quick set-up of the ref. stops along the fence (704 mm)

CODE: 26000059

To carry out the line vertical drilling process very quickly and accurately, without using the long fence. It is highly recommended to have this device both sides of the machine to process panels longer than 2 mt

Pneumatic ref. pin for line drilling (1 piece) - ( option to be specified at the order) 

CODE: 26401900

For a costant and even movement of both vertical boring heads during the drilling process ( option to be specified at the order) 

CODE: 26405107

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008395

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008391

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008392

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008393

It provides an additional support for the long panels, increasing their stability during the working process

CODE: 26800215

It provides an additional support for the long panels, increasing their stability during the working process 

N.2 supports for long panels on the aluminum fence

CODE: 26850623

For an even quicker and more accurate set-up 

N.2 pneumatic ref. stops with digital read-out display, sliding on the long fence ( option to be specified at the order)

CODE: 26850624

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process 

N.2 hold-down clamps on the aluminum fence ( option to be specified at the order)

CODE: 26850622

For a constant and even movement of the two vertical boring heads during the drilling process ( option to be specified at the order) 

CODE: 26800403

It provides an additional reference point for the positioning of long panels, increasing their stability and consequently the accuracy of the working process.

CODE: 26800203

The special rubber covering, patented and guaranteed by Maggi: 60-year leading manufacturer, ensures the highest grip on the workingpiece.

Patented "Feeder Grip 363 " rubber wheel 120x 60 mm diam. / 40 shore best suited for extremely smooth surfaces ( veneer / laminated wood)

CODE: 30102015

The special rubber covering, patented and guaranteed by Maggi: 60-year leading manufacturer, ensures the highest grip on the workingpiece

Rubber wheel 118x 50 mm diam. / 65 shore, best suited for rough surfaces ( unfinished wood)

CODE: 30100014

Guaranteed highest grip, specific for the feeding of panels with an unfinished surface ( raw wood)

Wheel made of cast-iron 120x60 mm

CODE: 40102015

The special rubber covering, patented and guaranteed by Maggi: 60-year leading manufacturer, ensures the highest grip on the workingpiece

Patented "Feeder Grip 758 " rubber wheel 120x 60 mm diam. / 50 shore, best suited for smooth surfaces ( finished wood)

CODE: 30100015

The special rubber belt, patented and guaranteed by Maggi: 60-year leading manufacturer, ensures the highest grip on the workingpiece.

A set of n°3 Patented "Feeder Grip 758" toothed belts for Steff 2039-CI, dimensions : 17x21x830 mm / 45 shore, best suited for smooth surfaces ( finished wood)

CODE: 23201013

The special rubber covering, patented and guaranteed by Maggi: 60-year leading manufacturer, ensures the highest grip on the workingpiece. The innovative "SEMIH-HUB" patent provides a remarkable advantage reducing the rubber-roller wear rate by up to 51%

Rubber covering 120x 60 mm diam. / 50 shore, best suited for smooth surfaces ( finished wood)

CODE: 31301019

The special rubber covering, patented and guaranteed by Maggi: 60-year leading manufacturer, ensures the highest grip on the workingpiece. The innovative "SEMI-HUB System" patent provides a remarkable advantage reducing the rubber-roller wear rate by up to 51%

Rubber covering 100x 50 mm diam. / 50 shore best suited for smooth surfaces ( finished wood)

CODE: 31500062

The innovative "SHS" patent provides a remarkable advantage reducing the rubber-roller wear rate by up to 51%

One only semi-hub for SHS wheels, suited for rubber coverings 120x60 mm ( one roller is made up of two semi-hubs)

CODE: 41300062

The special rubber covering, patented and guaranteed by Maggi: 60-year leading manufacturer, ensures the highest grip on the workingpiece.

Patented "Feeder Grip 758 " rubber wheel, 80x 28 mm diam. / 50 shore - best suited for smooth surfaces ( finished wood)

CODE: 30000004

It permits to fix the base of the universal stand sideways of the working table and to tilt the power-feeding unit quickly to free space for maintenance and/or other adjusting operations

CODE: 22100151

It permits to fix the base of the universal stand sideways of the working table and to tilt the power-feeding unit quickly to free space for maintenance and/or other adjusting operations

CODE: 21401100

It allows a more flexible positioning of the power-feeding unit on the tool-machine (  out-of-standard positioning ) avoiding any possible collisions between the motor switch-box and the stand, as showed in the pictures

CODE: 23201012

The double joint kit for STEFF 20316 POWER allows to install the stand of the power-feeding unit ALSO to the right of the tool ( looking at the machine from the operator side) for a higher flexibility during the working process

CODE: 41400012

It increases the stability of the 6-wheel feeder during the heavy-duty working process, minimizing the vibrations and ensuring a constant and even feeding of the workpiece thowards the tool

CODE: 21100100

"High-speed" gear set (to increase the speed range from 3-18 m/min to 4-33 m/min)

By using this gear set You can widen the range of the available feeding rates to obtain a faster feeding and a higher productivity 

CODE: 40510100

"High-speed" gear set (to increase the speed range from 3-18 m/min to 4-33 m/min)

By using this gear set You can widen the range of the available feeding rates to obtain a faster feeding and a higher productivity

CODE: 40610100

The double joint kit for STEFF 2033 allows to install the stand of the power-feeding unit ALSO to the right of the tool ( looking at the machine from the operator side) for a greater versatility  

CODE: 41400011

Once installed on the stand, the innovative EASY swivel joint makes it fast and easy to tilt and adjust the power-feeding unit.

The EASY swivel joint is a UNIVERSAL PATENT: it is compatible with all professional Maggi stands, new and older ones, and with most of the other brands  on the market.

Inner diameter of collar: 75 mm / Collar thickness : 20 mm /  lower base diameter of conical fitting: 48.85 mm / upper section diameter of conical fitting: 43.25 mm / conical fitting inclination angle: 5°

CODE: 23320500

To make the handling of large-size panels easier for the operator 

Independent idle-roller table 500x1500 mm ( idle-roller surface only) 562x1540 mm (incl.frame), adjustable height from 770 to 1.175 mm, max. capacity 45 Kg/m. It can be installed both sides of the machine

CODE: 27304100

The laser displays the line to be cut on the panel for a more accurate cutting process

CODE: 25416203

To speed-up the vertical, line drilling process ( option to be specified at the order) 

CODE: 27845012-gt800

To speed-up the vertical, line drilling process ( option to be specified at the order) 

CODE: 27845011-GT 800