The lever located on the baty of the aforementioned feeders is essentially a gear shift that allows you to quickly double the available speeds without having to change the internal gears.

For the correct use of the feeder and to preserve the internal gears from sudden breakages, it is important to ensure that the engine is turned off before turning the speed change lever located on the baty.

The maximum height at which I can position the wheels of the power-feeder relative to the work surface may vary depending on the model (please refer to the image for the specific data related to your model of interest). On the other hand, the minimum height is always zero, as the wheels will always make contact with the work surface

First of all, it is necessary to set the most appropriate feeding speed according to the type of processing to be carried out.

The right working speed is determined by considering various aspects: the type of material to be feeded (weight and surface finish) and the extent of the processing or removal to be performed.

As a good rule of thumb, the more important the processing and the heavier the piece to be feeded, the lower/slower the selected speed should be.

In addition to the feeding speed, the choice of the type and number of rollers is also important:

Soft rubber rollers with high grip are for very smooth and lacquered surfaces

Hard rubber rollers with high resistance are for rough surfaces

Steel wheels are for rough surfaces

Rubber tracks are for short and narrow pieces

To feed long pieces, we recommend purchasing the STEFF 2068 power-feeding unit with 6 rollers.

Discover more about speed and the types of rollers available by viewing the attached images!

Please, make reference to the enclosed pictures and instructions with respect to each model ... 

Please, watch the enclosed video ...

Please refer to the attached speed table.

Please refer to the attached table for the available stand types ...

In the attachment, you will find the complete comparison table of all models in the Maggi power-feeders line.

Maggi power-feeders are available in the following voltages: 

On all power-feeding units (excluding STEFF 2032, STEFF 2033, and STEFF 20316 POWER), it is possible to install softer springs (Accessory on request - code 41200013) to achieve greater cushioning (suspension) of the wheels (> 20 mm). One spring is required for each wheel.

The rollers we mount on our power-feeders differ from each other in TERMS OF TYPE, MATERIAL, and DIMENSIONS.

TYPE

STANDARD: with aluminum support and FIXED rubber coating

SHS: with "Semi-Hub" aluminum support and REPLACEABLE rubber coating

MATERIAL

Rubber: patented vulcanized "Feeder Grip" with high grip and durability, available in different SHORE indices (which determine the hardness and flexibility of the rubber for various uses)

ROLLERS 40 Shore: softer rubber, offers greater grip suitable for dragging coated materials, very smooth surfaces, and delicate finishes.

ROLLERS 50, 65, and 70 Shore: harder rubber, suitable for dragging standard panels, semi-finished products, with rough surfaces.

CAST IRON ROLLERS: for dragging raw wood.

DIMENSIONS:

The rollers that are standardly mounted on professional power-feeders are STANDARD rubber rollers, 120 x 60 mm with 50 Shore hardness.

The STEFF 2033 and STEFF 20316 POWER feeding units are equipped with SHS rubber rollers, 120 x 60 mm - 50 Shore.

The STEFF 2032 is equipped with standard rubber rollers, 80 x 28 mm - 50 Shore

As of today, our range does NOT include a stand with motorized positioning, but only manual.

Yes, it is possible to apply a new power-feeding unit to an old stand, as long as it is manufactured by Maggi; however, it is always advisable to verify compatibility by measuring the following dimensions, as per the attached drawing:

- Diameter of the hole in the horizontal tube, and diameter of the base hole: 58 mm

- Inner diameter of the collar hole: 75 mm

- Height (thickness) of the collar: 30 mm

Attention! STEFF 2032 and STEFF 2033 models are always supplied complete with a stand; it is not possible to purchase only the feeding unit without its stand.

Please, make reference to the enclosed pictures and video

Yes, it is completely normal for the motor of a feeder to reach high temperatures (even up to 50°C) during operation without causing any damage or affecting the proper functioning of the device. This is a typical characteristic of the equipment when in use.

The Maggi rubber-coated rollers are made from vulcanized rubber, which is treated at high temperatures. This process protects the product from wear in temperatures ranging from -20 °C to +40 °C, making them resistant to weather conditions and ensuring a long lifespan.

The lifespan can vary depending on the type of processing and the material being conveyed.

The Maggi feeders are supplied complete with an electric cable (3 meters long for professional and semi-professional feeders and 1 meter for the STEFF 2032), but they do NOT come with a power plug. The compatible plug variants for different machine tools are numerous and have very different characteristics depending on the country, making it impossible to standardize their supply.

All Maggi feeders - except for the STEFF 20316 POWER - are also available in the single-phase version.

PROFESSIONAL FEEDERS

LUBRICATION TYPE A: SLIDING POINTS ON THE STAND: Thread of the crosspiece, lifting screw, and rack of the horizontal tube. Lubricate with grease type "Persian Poligrease EP/2" or equivalent. Frequency: As needed, if the parts show excessive friction.

LUBRICATION TYPE B: WHEELS through grease fittings/nozzles located on the shafts of the rollers and under the feeder. Lubricate with the appropriate lubrication pump (provided with the feeder), pumping the grease into the nozzles. Use grease type "Persian Poligrease EP/2" or equivalent. Recommended frequency: Every 3 months.

LUBRICATION TYPE C: OIL PAN AND TRANSMISSION Regularly check the oil inside the pan. The oil level should not drop below 4 cm. Use oil type "IP MELLA -NA 220" or equivalent. Recommended frequency: Every 6 months.

SEMI-PROFESSIONAL (STEFF 2033) AND HOBBY (STEFF 2032) FEEDERS

The STEFF 2033 model has wheels mounted on a bearing system, for which NO lubrication is necessary; therefore, the lubrications to be performed are exclusively types A and C.

The STEFF 2032 HOBBY model does not require lubrication on the wheels. The lubrications to be performed in this case are also exclusively types A and C.

Please refer to the attached image to identify the standard color of the rubber, for the various types of available rollers ..

In the attached image, you will find the rollers that we supply as standard, for the different types of automatic power-feeding units.

TYPE A ADJUSTMENT: Positioning the feeder at 'Point 0'

The zero point represents the height at which the power-feeding unit must be positioned to correctly pull the piece. Since the feeder must exert a certain pressure on the piece, it is advisable to position it at a height such that the rollers remain 3/4 mm lower than the work surface. This distance represents the 'preload' that is intended to be exerted on the piece. The mentioned distance varies based on the pressure you want to exert and the type of processing.

TYPE B ADJUSTMENT: Unlocking the counter.

Using a 2.5 mm Allen key, act on the collar of the counter located under the handle and look for the release screw that is under the rubber sheath. Once the screw is found, unlock the counter from the lifting mechanism.

TYPE C ADJUSTMENT: Resetting the counter.

Once the counter is unlocked, by turning the screw around the axis of the handle, reach the position 0000-0. The last zero to the right of the line represents tenths of a millimeter.

TYPE D ADJUSTMENT: Locking the counter.

Once you reach zero, tighten the internal screw again to lock the movement of the counter to that of the lifting handle. By acting on the counter from this position (0), it is possible to adjust it to all the thicknesses of the panels that you intend to work on."

In the attached image, you will find the dimensions and measurements of the accessory 'Tipper clamp 96' (code 22100151)."

The feeders are supplied with a 3-meter long electric cable; the only exception is the hobby feeder, STEFF 2032, which has a shorter cable, measuring 1 meter."

Attached is the complete list of recommended spare parts for the automatic feeders...

For pricing information, please contact our spare parts office (service@maggi-technology.com )."

Please see the attached video..."

Please see the attached drawings..."

The vertical and horizontal tubes of the stands for the professional feeders (STEFF 2034 / 38 SMART / 2038 / 2038-CI / 2044 / 2048 / 48 SMART / 2068 / VARIO 3 / VARIO 4 / SUPERSONIC 3 / SUPERSONIC 4) have a diameter of 58 mm; while the tubes of the stands for the STEFF 2033 feeder have a diameter of 49 mm, and those for the STEFF 2032 feeder have a diameter of 40 mm.

It is a safety system that, thanks to the careful design of the cross support, prevents any risk of disconnection between the various components, even in the event of improper tightening by the operator, thus avoiding the risk of the power-feedig unit detaching and falling, which could cause injuries to the operators.

In the case where the support is mounted on a potential "Tilter" (see Fig. 2), the Elastic Pin System, through the pin (13b) (see Fig. 1), ensures that the vertical tube (11) does not slide out of the base (12), even if the handle has not been locked. This safety system also applies to the horizontal tube (10) (see Fig. 1), as the pin (13a) prevents the pipe (31) from sliding out of the tube itself."

The distance between the mounting holes for professional feeders, specifically for rollers measuring 120 x 60 mm and 118 x 50 mm, is 48 mm, while for the 80 x 28 mm rollers, it is 32 mm. The SEMI-HUB rollers used on the STEFF 2033 and STEFF 20316 POWER models do not have mounting holes.

Please see the attached image for further clarity."

Yes, the stands of the professional feeders are supplied with a pipe-joint-collar group (also called joint group or connection group) to allow connection to the feeding device.

Some models of power-feeders such as: STEFF 20316 POWER, STEFF 2033, and STEFF 2032, due to their particular design, do not require the collar; the stand is supplied only with a pipe that connects to the joint already mounted on the body (baty) of the feeder.

See images for further clarity..."

The STEFF 2033, thanks to its compact dimensions but professional performance, is undoubtedly the ideal model for working on a combination machine."

For the internal lubrication of the gears of our feeders (automatic advancements), we recommend using IP - MELLANA OIL / ISO VG 220.

TECHNICAL DATA:

Density at 15°C = 0.895

Viscosity at 100°C = 18.7

Viscosity at 40°C = 220

Viscosity index = 95

Flash point V.A. = 240

Pour point = -21

The complete technical data sheet and safety data sheet are available upon request (service@maggi-technology.com )."

The stand, or support, for the feeder consists of:

- A cast iron base, with mounting holes, for fixing to the machine tool table, or tilting device

-A vertical tube

- A crosshead assembly

- A horizontal tube with rack

- Positioning handwheels

- A top lifting handle

- A pipe assembly, joint, and collar for attaching the feeder 

(the stand for STEFF 20316 POWER, STEFF 2033, STEFF 2032 only includes the pipe assembly, while the joint assembly is provided pre-mounted on the baty - structure of the automatic power-feeder ; the collar is not needed.)

The STEFF 2033 and STEFF 2032 power-feeding units include the stand in the standard equipment, while all other models are sold WITHOUT a stand, which can be purchased separately as an accessory."

STEFF 2033 and STEFF 2032 power feeding units include the stand in the standard equipment, while all other models are sold WITHOUT a stand, which can be purchased separately as an accessory."

Please, refer to the attached table ...

The height of the feed roller, relative to the work surface, is adjusted by manually turning the handwheel positioned at the top of the vertical column of the stand; the STAND PLUS (cod. 13400600) also has a numeric counter on which the exact height can be read for more accurate and faster adjustment.

Attached you will find all the layouts with the overall dimensions for each type of Maggi feeder.

Yes, in the range of Maggi feed units, the STEFF SUPERSONIC 3 and 4 models have variable speed with an electronic inverter.

In the range of Maggi feeders, there is already a specific model with tracks, namely the STEFF 2038-CI (see product data sheet in the products section of the website). The replacement of the rollers with tracks, through the special PULLEY AND TRACK KIT (Spare part to be ordered separately) is possible ONLY on the 3-ROLLER PROFESSIONAL models, such as: STEFF 2034, STEFF 2038, STEFF 38 SMART, but this operation must be carried out by a specialized technician. For more information, we invite you to contact our service department (service@maggi-technology.com).

Automatic feeders are an indispensable safety device:

- They ensure the operator's safety.

- They guarantee precise operations with consistent quality on every piece.

- They provide higher productivity compared to manual pushing by an operator.

HOW TO CHOOSE THE MOST SUITABLE MODEL FOR YOUR NEEDS...

... BY NUMBER OF ROLLERS

3 ROLLERS - SIMPLE MACHINING, MODEST MATERIAL REMOVAL

Models: Steff 2034 / Steff 38 SMART / Steff 2038 / Steff 20316 POWER / VARIOSTEFF 3 / STEFF SUPERSONIC 3 / STEFF 2033 / STEFF 2032 Hobby

•    For simple machining of small wooden frames, rods, and profiles

•    Guarantees maximum precision with 2 entry rollers that pull the piece and 1 roller that holds it at the exit

4 ROLLERS - COMPLEX MACHINING, SIGNIFICANT MATERIAL REMOVAL

Models: Steff 2044 / Steff 48 SMART / Steff 2048 / VARIOSTEFF 4 / STEFF SUPERSONIC 4

•    For more complex machining, significant material removal on medium and large wooden profiles

•    Guarantees maximum precision with 2 rollers pulling the piece at entry and 2 rollers holding it at exit

6 ROLLERS - COMPLEX MACHINING, SIGNIFICANT MATERIAL REMOVAL

Model: Steff 2068

•    For the most complex machining, significant material removal on large wooden beams

•    Guarantees maximum precision with 3 rollers pulling the piece at entry and 3 rollers holding it at exit

According to the type of processing, we recommend having an additional support that further assists during the feeding process ( See the product sheet of Steff 2068 - The accessories)

TRACKS FOR NARROW AND SHORT PIECES

Model: Steff 2038-CI

•    Indicated for machining narrow and short pieces

•    Guarantees maximum precision and adherence to the surface thanks to 3 continuous tracks

•    Versatile, can also be used for standard machining

... BY NUMBER AND TYPE OF SPEEDS

4 Fixed Speeds 4 – 8 – 11 – 22 mt/min forward and backward Professional Machine Models STEFF2034 – STEFF2044 - Motor 1 HP / 0.75 with Sized STAND

4 Fixed Speeds 4 – 8 – 9 - 18 mtmin– model STEFF 2032 – Motor 0.24 HP / 0.18 KW with REDUCED dimensions for HOBBYIST machines

8 Fixed Speeds 2 - 4 - 5.5 - 6.5 - 11 - 13 - 16.5 - 33 m/min forward and backward Professional Models STEFF2038 and 2038 SMART – STEFF2048 and 2048 SMART - STEFF 2038-CI and STEFF 2068 - Motor 1 HP / 0.75 KW with Sized STAND

8 Fixed Speeds 3.2 - 6.3 - 8.3 - 12.5 - 16.7 - 25 - 32 - 63  mt/min – model STEFF 2033 – Motor 1 HP / 0.75 KW COMPACT dimensions for SEMI-PROFESSIONAL machines

SPEEDS are chosen based on the type of work done most frequently

•    Lower speeds are ideal for important machining for better piece holding and greater work accuracy (2 - 4 - 5.5 - 6.5 mt/min)

•    Higher speeds are ideal for simpler machining that can be done at higher speeds (8 -11 - 13 - 16.5 - 33)

Models with VARIABLE SPEEDS forward and backward satisfy the needs of those who must frequently change the type of machining and relative feed speed

MECHANICAL VARIATOR - models VARIOSTEFF3 and VARIOSTEFF4 - ranges from 3 to 18 mt/min and up to 33 m/min with high-speed kit (accessory) 

Professional Models Motor 1 HP / 0.75 KW with Sized STAND

•    Speed adjustment is obtained by rotating the knob on the body

ELECTRONIC VARIATOR - models SUPERSONIC 3 and SUPERSONIC 4 - ranges from 0.5 to 25 mt/min and up to 33 m/min with high-speed kit (accessory)

Professional Models Motor 1 HP / 0.75 KW with Sized STAND

•    Speed adjustment is obtained by rotating the knob on the digital display

All professional feeders can be positioned with the stand base also to the right of the tool, without requiring additional devices. The STEFF 2033 and STEFF 20316 POWER models can be positioned with the stand base also to the right of the tool, only by applying an accessory called "double joint" identified by code 41400012. The STEFF 2032 model CANNOT be positioned with the base to the right of the tool."

No, it is not possible to install motors with a higher number of kW on Maggi feeders. Attached is a table with the standard motor specifications for various models

ATEX certification is a European directive that applies to equipment that can be used in potentially explosive environments.

Maggi products, particularly the motors used, are not ATEX certified.

For more information, you can contact our customer service office at service@maggi-technology.com 

You can identify each spare part within the spare parts area on the website at the following link: https://www.maggi-technology.com/it/ 

Identifying a spare part is easy; the website has a "spare parts identification" function that can be accessed from various points on the site: at the top of each page on the bar, from the HOME page, and through the MENU in the section dedicated to "SPARE PARTS" (as shown in the attached image), as well as in the "SUPPORT" - "after-sales support" section at the bottom of the contact area.

Once you are in the "spare parts identification" function, simply enter the machine code in the search box, and the corresponding exploded views with the codes for all the spare parts will appear. To find out the price of each spare part, you can contact our service directly via email at service@maggi-technology.com or by calling +39 0571 635 433, or you can ask the nearest MAGGI dealer; you can find them on the dealer map on the website at the following link: https://www.maggi-technology.com/it/contatti/mappa-rivenditori.

To print or download the text and image contents of the product sheet, simply click on the .pdf link located below the main image of the product of interest (as shown in the attached image); then you can decide, within your printing program, whether to proceed with printing the document directly (the print quality will depend on your settings) or to create the PDF file (the .pdf file is quite large due to the presence of many images; for sending the document via email, it is recommended to save the document using the "save PDF with reduced size" option).

Maggi guarantees the availability of spare parts for up to 10 years from the product's manufacturing date.

For spare parts older than 10 years, availability is not guaranteed; you can send a request to our after-sales service (service@maggi-technology.com ) specifying the machine code in question, the year of manufacture, and including a photo of the product and the component for which you are requesting the spare part.

The tolerance for the indicated voltages is ±10%.

To allow the Maggi consultants to evaluate if a certain processing is feasible with one of their machines, I need to provide the following information and data:

• Dimensions of the workpiece (width, length, thickness, weight)
• Material (MDF panel, particleboard, plywood... solid wood... etc.)
• Type of processing to be performed (please send drawing or PDF file)
• Required productivity (number of pieces per day/week)
• Type of finished product and possibly a photo of it

At the time of order, it is possible to request a motor with a different voltage from the standard one (400V - 50 Hz - 3PH), or in single-phase version (only for products that allow it), but it is not possible to have a more powerful motor."