MAGGI OFFICIAL WEB SITE
For vertical double-row line drilling on furniture sides. The ideal solution for bookcase, bookshelf and wardrobe manufacturers.
-Small footprint: 2 sqm
-Faster than a single-head boring machine
More than 5.000 machines manufactured, over thirty years' experience. 100% made-in-Italy machines abiding by the highest quality standards as a result of the "Lean" manufacturing process, also known as "Toyota System".
N.2 vertical parallel boring heads with 23 spindles each.
Distance between the heads: Max 650 mm / Min. 130 mm
Distance between first and last spindle: 704 mm - 32 mm intereaxis
Quick-change spindles
Boring-depth adjustment on numeric counters
Ready to be connected to a dust collector
Manufactured abiding by EC standards
N.2 - 1,5 HP motors
N.6 patented, safety hold-down clamps
N.10 quick-change chucks
N.1 - 3000 mm long aluminium fence with 4 ref. stops
Boring-depth adjustment on numeric counters
N.2 extendables panel holders, both sides
Ready to be connected to a dust collector
Package: stackable wooden box
Manufactured according to EC standards
Having a total interaxes of 704 mm and with two boring-heads, the machine can perform a double row of parallel line holes in just one working cycle, and process a 3000 mm long side-panel in just four working cycles.
Boring depth and distance between the heads are easily adjustable with numeric counters.
N.6 quick-adjustable, pneumatic, safety clamps ensure the perfect panel hold-down, which results into always accurate drilling operations.
Thanks to the aluminum fence (3000 x 80 mm) with 4 reference stops.
Wide and solid, extendable, panel holders, both sides, giving additional support to the long working panels and easing their loading on the machine.
It considerably speeds up the vertical row drilling operations with respect to a single-head boring machine.
Made of steel, built to last. Eco-friendly, rust-resistant powder coating. Boring heads are made of aluminium, while internal gears are made of rectified steel.
| Boring heads | N. 2 |
|---|---|
| Distance between the heads min. - max. | 145 - 625 mm |
| Spindles each head | N. 23 |
| Left and right spindles for each head | N. 11 - N. 12 |
| Spindle interaxis | 32 mm |
| Total interaxis | 704 mm |
| Distance between rear head n°1 and rear fence (min. - max.) | 15 mm - 494 mm |
| Distance between front head n°2 and rear fence (min.- max.) | 160 mm – 639 mm |
| Max. tool diameter | 40 mm |
| Max. boring depth | 55 mm |
| Height of the working table | 875 mm |
| Max. panel thickness | 50 mm |
| Max. panel dimensions | 700 x 3000 mm |
| N° motors | HP 2 / KW 1,5 - RPM 2800 (x 2) |
| Standard pneumatic pressure | BAR 6/8 |
| Air consumption per working cycle | NL 20 |
| Dust-collection hood diam. | 80 mm |
| Overall dimensions (incl. full extended side roller tables) (incl. long fence mounted) | 1206 x 1180 x 1163 mm (2236 x 1180 x 1163 mm) (3000 x 1180 x 1163 mm) |
| Net weight | 320 kg |
| Package dimensions (machine) | 1270 x 1150 x 1130 mm |
| Fence package dimensions (each carton - n.2 cartons on the whole) | 1000 x 80 x 40 mm |
| Total gross weight | 361 Kg |
By using these quick-change tool-holders, You can mount Your drill-bits on the boring head in just "one click"
CODE: 36000061
To increase the hold-down pressure on the working panel and consequently its stability during the drilling process
N.1 additional hold-down clamp
CODE: 29971019 - BS 46
Having more reference points on the long fence means achieving a quicker and more precise set.up
N° 1 additional ref. stops for fence
CODE: 26010051
For the quick and accurate adjustment of the ref. stops along the fence
Ref. gauge for the quick set-up of the ref. stops along the fence (704 mm)
CODE: 26000059
To carry out the line vertical drilling process very quickly and accurately, without using the long fence. It is highly recommended to have this device both sides of the machine to process panels longer than 2 mt
Pneumatic ref. pin for line drilling (1 piece) - ( option to be specified at the order)
CODE: 26401900
For a costant and even movement of both vertical boring heads during the drilling process ( option to be specified at the order)
CODE: 26405107
To have the machine working in small handcraft shops having an electric system running on 220 Vlts ( option to be specified at the order)
CODE:
Electrical standards abiding by the Canadian wiring regulations ( option to be specified at the order)
CODE:
Attached is the list of recommended spare parts for BORING SYSTEM 46.
For pricing information, please contact our spare parts office (service@maggi-technology.com).
Please, watch the video ...
See attached drawings ...
The attached image shows the necessary workspace...
Please refer to the attached table for the available types of hinge aggregates ...
Please refer to the attached drawings for the requested information...
The hinge drilling aggregates attach to the spindles on the head with a simple click, just like regular drill bits.
Please refer to the attached image...
Please refer to the attached documentation...
The quick-change chucks (code 36000061) are mechanical tool holders that allow for the rapid mounting and removal of drill bits on the head of the boring machine, without the need for additional tools, just a click!
Yes, these multi-head boring machines are also available in a single-phase motor format.
Yes, Maggi semi-automatic boring machines, both single-head and multi-head, are also available in the single-phase motor format.
The reference pin is not just a generic alternative to the bar; in the case of processing (inline vertical drilling) panels longer than 2 meters, it becomes ESSENTIAL to complete the work!
Look at the attached drawings; as you can see, the third and final part of the operation cannot be completed with just the bar because the profile is not long enough to provide the necessary references. Furthermore, the reference pin is always to be preferred over the bar and should be recommended to the customer when precision is an essential requirement!
The hinge head units are offered by Maggi as accessories for their single-head and 3-head drills to allow the creation of the 3 holes for hinge application in a single drilling cycle. There are various types of head unit (see attached image), for each of which we recommend using specific 38.5 mm length drill bits (see attached image) - a 35 mm diameter center bit and 8 or 10 mm diameter side bits.
The hinge head unit can be installed on any spindle of the drill head, whether it rotates clockwise or counterclockwise, so the rotation direction of the bits is not a limiting factor. For ease of use, Maggi offers the 35 mm diameter center bit with a CLOCKWISE rotation and the side bits with a COUNTERCLOCKWISE rotation. The 3 bits can be purchased separately or as a kit.
For the lubrication of the heads of the multi-spindle boring machines , we recommend using EP 2 type grease. We advise checking the optimal lubrication level every 500 hours of operation.
Attached are instructions and images to correctly perform the lubrication of the drilling head of the multi-spindle boring machines ...
The hinge aggregates that we offer as accessories, in order to make the 3 holes necessary for the application of classic door hinges in a single work cycle, can be applied to the drilling heads of the following Maggi drilling machines:
- BORING SYSTEM 21 PRESTIGE
- BORING SYSTEM 21 TECHNOLOGY
- BORING SYSTEM 23
- BORING SYSTEM 29
- BORING SYSTEM 35
- BORING SYSTEM 323
- BORING SYSTEM 323 DIGIT
HINGE AGGREGATE CANNOT BE APPLIED ON THE BORING SYSTEM 46 DRILLING MACHINE
The drilling aggregates for hinges and for Cabineo can be applied to all traditional Maggi drilling machines, EXCEPT THE BORING SYSTEM 46
ATEX certification is a European directive that applies to equipment that can be used in potentially explosive environments.
Maggi products, particularly the motors used, are not ATEX certified.
For more information, you can contact our customer service office at service@maggi-technology.com
You can identify each spare part within the spare parts area on the website at the following link: https://www.maggi-technology.com/it/
Identifying a spare part is easy; the website has a "spare parts identification" function that can be accessed from various points on the site: at the top of each page on the bar, from the HOME page, and through the MENU in the section dedicated to "SPARE PARTS" (as shown in the attached image), as well as in the "SUPPORT" - "after-sales support" section at the bottom of the contact area.
Once you are in the "spare parts identification" function, simply enter the machine code in the search box, and the corresponding exploded views with the codes for all the spare parts will appear. To find out the price of each spare part, you can contact our service directly via email at service@maggi-technology.com or by calling +39 0571 635 433, or you can ask the nearest MAGGI dealer; you can find them on the dealer map on the website at the following link: https://www.maggi-technology.com/it/contatti/mappa-rivenditori.
To print or download the text and image contents of the product sheet, simply click on the .pdf link located below the main image of the product of interest (as shown in the attached image); then you can decide, within your printing program, whether to proceed with printing the document directly (the print quality will depend on your settings) or to create the PDF file (the .pdf file is quite large due to the presence of many images; for sending the document via email, it is recommended to save the document using the "save PDF with reduced size" option).
Maggi guarantees the availability of spare parts for up to 10 years from the product's manufacturing date.
For spare parts older than 10 years, availability is not guaranteed; you can send a request to our after-sales service (service@maggi-technology.com ) specifying the machine code in question, the year of manufacture, and including a photo of the product and the component for which you are requesting the spare part.
The tolerance for the indicated voltages is ±10%.
To allow the Maggi consultants to evaluate if a certain processing is feasible with one of their machines, I need to provide the following information and data:
At the time of order, it is possible to request a motor with a different voltage from the standard one (400V - 50 Hz - 3PH), or in single-phase version (only for products that allow it), but it is not possible to have a more powerful motor."
Make your life easier. Save time and cut costs.
Maggi has revolutionised the world of traditional machines by making a free APP available to its resellers, providing remote assistance using advanced technology that is friendly and accessible for everybody.
Instant translation
Thanks to augmented reality technology and instant translation into 80 languages, we can guide an operator on the other side of the world finding the solution to a problem, in real-time.
Via delle Regioni, 299 - 50052 Certaldo (Firenze) Italia
Tel. +39 0571 63541 - C.F. e P.IVA IT 01264750520 - REA: Firenze N. FI - 602104
Privacy Policy
Cookie Policy
Update Cookie Preferences
PRINT PRODUCT SHEET PDF
