SINGLE-HEAD BORING MACHINES

BORING SYSTEM
21 PRESTIGE

Semiautomatic, multispindle, single-head boring machine

For horizontal and vertical drilling into wood-based panels and solid wood, for the furniture manufacturing.

- Small footprint:1 sqm

- Two times faster than a manual boring machine

More than 20.000 machines manufactured, over thirty years' experience. 100% made-in-Italy machines abiding by the highest quality standards as a result of the "Lean" manufacturing process, also known as "Toyota System".

TECHNICAL FEATURES MODEL

Quick-change spindles

32 mm interaxis

Pneumatig head rotation from 0° to 90°

Well-dimensioned working table made of steel

Ready to be connected to a  dust-collector 

Manufactured according to EC standards



STANDARD EQUIPMENT

N.1 - 2HP Motor

N.2 patented safety hold-down clamps

N.5 quick-change chucks

N.2, 1500 mm long, aluminium fences, with 2 ref. stops

N.2 collapsible side-fences on working table, manual adjustment on a metric scale and magnify glass and nonius

N.2 fixed ref. stops at 37 mm for hinges

Boring-height adjustment on numeric counters

Spiral System: patented device for the quick adjustment of the boring depth 

Rear fence having 300 mm max. stroke

Package:stackable carton box

Ready to be connected to a dust- collector

Manufactured according to EC standards





 

MORE INFORMATION

FAST HORIZONTAL DRILLING

Thanks to the 640 mm interaxis and the large working table, You can process 2 panels having 316 mm width at the same time.

FAST VERTICAL DRILLING

You can process 3000 mm - long sides in 5 working cycles.

PERFECT PANEL JOINTS

The ref. side fences, adjustable along a metric bar, with magnify glass and nonius ,  always represent a precise reference point for the operator and guarantee the perfect parallelism of the drilling operations.

QUICK SET-UP 

Adjusting the boring depth is extremely easy with the "Spyral System" device and the 10 mm automatic reset for vertical drilling.

VERSATILITY

It drills at any angle between 0° and 90°.

SAFE PANEL HOLD-DOWN

The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process.

 

MORE INFORMATION

PRODUCTIVITY

Two times faster than a bench top boring machine.

QUICK AND ACCURATE PANEL POSITIONING

Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops, (two are included, two are options).

REAR FENCE

The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence.

FIXED STOP FOR HINGES

The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.

SOLID STRUCTURE

Made of steel, built to last, eco-friendly, rust-resistant powder coating. Boring head is made of aluminium, while internal gears are made of rectified steel.

QUICK AND ACCURATE PANEL POSITIONING

Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops, (two are included, two are options).

 

MORE INFORMATION

SPECIAL DESIGN TO WORK WITH LARGE-DIAMETER DRILL-BITS

The comb has been designed so as to have 3 fixed positions where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.

FAST DRILLING OF HINGE HOLES

You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.

 

DATA SHEET

Spindles N. 21
Left and right spindles N. 10 sx - N. 11 dx
Spindle interaxis 32 mm
Total interaxis 640 mm
Max. tool diameter 40 mm
Max. boring depth 65 mm
Max boring height 55 mm
Height of working table 860 mm
Dimensions of the working table 885 x 349,5 mm
Max. panel thickness (optional*) 60 mm (130 mm *)
Max. panel dimensions 900 x 3000
Motor HP 2 / KW 1,5 - RPM 2800
Stepper motor 1
Stepper motor 2
Linear actuator
Standard pneumatic pressure BAR 6/8
Air consumption per working cycle 10 NL
Dust collection hood diameter 80 mm
Overall dimensions - net weight: 1015 x 990 x 1270 mm
Package dimensions (machine) 1115 x 950 x 1050 mm
Rod packaging size 1500 x 120 x 60 mm
Gross weight 290 Kg
Net weight 260 Kg
 

ACCESSORIES

Improve the comfort
Independent idle-roller table 500x1500 mm

To make the handling of large-size panels easier for the operator 

Independent idle-roller table 500x1500 mm ( idle-roller surface only) 562x1540 mm (incl.frame), adjustable height from 770 to 1.175 mm, max. capacity 45 Kg/m. It can be installed both sides of the machine


CODICE: 27304100

Ergonomics
Quick-change bush / chuck

By using these quick-change tool-holders, You can mount Your drill-bits on the boring head in just "one click"


CODICE: 36000061

Ergonomics
Tool-tray

To keep Your drill-bits and tools tidy and always close at hand


CODICE: 26000014

Ergonomics
Stand for the long fences

To keep Your fences always close at hand


CODICE: 26000010

Specific for long panels
Ref. stops to match the long panel

It keeps long working panels aligned for a more accurate drilling process

N. 2 ref. stops to match the long panel during transversal drilling


CODICE: 26001071

Specific for long panels
1000 mm long fence extension

To increase by 1 mt the length of the 2 standard fences (1,5 mt each) and carry out the in line drilling process on long panels


CODICE: 29970302

 

ACCESSORIES

Increase the versatility
Blocks to lift the hold-down clamps up to 130 mm

To process beams having a maximum height of 130 mm


CODICE: 26001015

Increase the versatility
Set of two ref.stops for drilling at 45° and 90°

To drill mouldings and laths


CODICE: 26000069 A / 26000069 B

Quicker set-up
Set of n° 2 additional ref. stops

For an even quicker and more accurate set up


CODICE: 26028819

Enhance the hold-down on the workpiece
Additional hold-down clamp

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process

N.1 additional hold-down clamp


CODICE: 29971019

Increase the accuracy of the working process
Ref. pin for line drilling

To carry out the line vertical drilling process very quickly and accurately, without using the long fence. It is highly recommended to have this device both sides of the machine to process panels longer than 2 mt

Ref. pin for line drilling (1 piece)


CODICE: 29900100

Enhance the hold-down on the workpiece
Additional hold-down clamps

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process. It allows to process two small panels at a time 

N.2 additional hold-down clamps


CODICE: 29971020

 

ACCESSORIES

Quicker set-up
Ref. gauge for reaf fence parallelism

For a quick and accurate set-up of the rear fence

Ref. gauge for reaf fence parallelism ( 500 mm)


CODICE: 26000061

Quicker set-up
Kit to join the two aluminium fences

To get one single 3mt long fence

Kit to join the two aluminium fences (1500 + 1500 mm)  


CODICE: 26028820

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Grass"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008395

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Salice"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008391

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Blum"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008392

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Hettich"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008393

 

ACCESSORIES

Recommended tools
Tool set made up of 3 drill-bits for hinges

Recommended drill-bit set for drilling aggregate for hinges, made up of n. 2 left-handed drill-bits 8mm diameter and n.1 right-handed drill-bit 35 mm diameter

Tool set made up of 3 drill-bits for hinges


CODICE: 26845821

Quick-drill of holes for Cabineo furniture connector
Drilling aggregate for "Cabineo" connectors

To drill the holes for the "Cabineo" connectors in one single working cycle

Drilling aggregate for "Cabineo" connectors, including 3 drill-bits 15 mm diam.


CODICE: 26845820

Recommended tools
Recommended drill-bit set

A selection of drill-bits by our technicians for a professional approach


CODICE: 26054750

Quicker set-up
Gauge for the symmetry of the side fences

For a quick and accurate adjustment of the two side fences on the working table, to obtain the perfect parallelism of the drilling process

Gauge for the symmetry of the side fences (only for BS 21 PRESTIGE)


CODICE: 26200069

Quicker set-up
Ref. gauge for the quick set-up of the ref. stops along the fence

For the quick and accurate adjustment of the ref. stops along the fence, when carrying out the line drilling process

Ref. gauge for the quick set-up of the ref. stops along the fence (640 mm)


CODICE: 26200070

Special voltages
Single-phase Motor

To have the machine working in small handcraft shops having an electric system running on 220 Vlts ( option to be specified at the order)


CODICE:

 

ACCESSORIES

Special voltages
"CSA" standards

Electrical standards abiding by the Canadian wiring regulations ( option to be specified at the order)


CODICE: