SINGLE-HEAD BORING MACHINES

MS LINE 704
PATENTED SYSTEM

Single-head ,multi-splinde, semi-automatic boring machine 


Drilling in horizontal, vertical, and at any angle from 0° to 90°, with a main operating axis independent from the 32 mm system,featuring two movable zero reference points.

Ideal for custom-made and non-standard furniture production.

More than 20.000 machines manufactured, over thirty years' experience.100% made-in-Italy machines abiding by the highest quality standards as a result of the "Lean" manufacturing process, also known as "Toyota System".

MODEL TECHNICAL FEATURES

Quick-change spindles

32 mm indipendent

Pneumatig head rotation from 0° to 90°

Well-dimensioned working table made of steel

Ready to be connected to a  dust-collector 

Manufactured according to EC standards



N. 1 - 2HP Motor

N.2 patented safety hold-down clamps


N.2 removable side-fences on working table, adjustable on high-precision numeric counters 

Boring-height adjustment on numeric counters

Spiral System, patented device for the quick adjustment of the boring depth

 N°1 KIT DIME DA DA 1 A 14 + N°1 KIT DIME DA 15 A 31+59,5

Lateral tool-tray ( tools not included)

Package: on a wooden-pallet 

Ready to be connected to a dust- collector

Manufactured according to EC standards





 

MORE INFORMATION

MAXIMUM PRECISION AND REPEATABILITY

The spacer set allows maximum precision and repeatability of holes in very short time.


ADJUSTABLE LATERAL REFERENCES

Two lateral fences maintain the perfect angle relative to the drilling head and act as adjustable reference points on both sides of the worktable.
 By leaning spacers to the lateral fences, it is possible to quickly and easily modify the drilling zero point and therefore the reference interaxis.

ADJUSTABLE MILLIMETRIC SCALES ON THE REFERENCE FRAME

The main millimetric scales on the patented reference frame profiles are adjustable with respect to the drilling head in horizontal position.
 This allows drilling operations to be set according to the actual panel dimensions.


GREATER OPERATIONAL PRECISION AND OPTIMAL PANEL SUPPORT

The patented measuring frame, integrated into the machine, features reference points on each side and two crossbars with rollers, significantly increasing the working surface.


FOR LARGE AND NON-STANDARD PIECES

The pressure beam supports are deeper than on a standard single-head drilling machine:
 450 mm (instead of 300 mm), allowing the processing of larger and non-standard elements.


QUICK ADJUSTMENT FOR DIFFERENT THICKNESSES UP TO 200 MM

The pressure beam supports feature height adjustment via patented rack systems, allowing four different positions and enabling machining of workpieces up to 200 mm thick.

 


 

DATA SHEET

Spindles N. 23
Left and right spindles N. 11 sx - N. 12 dx
Spindle interaxis 32 mm
Total interaxis 704 mm
Max. tool diameter 40 mm
Max. boring depth 65 mm
Max boring height 55 mm
Height of working table 860 mm
Dimensions of the working table 949 x 350 mm
Max. panel thickness (optional*) 200 mm
Max. panel dimensions 960 x 3000 mm
Motor HP 2 / KW 1,5 - RPM 2800
Stepper motor 1
Stepper motor 2
Linear actuator
Standard pneumatic pressure BAR 6/8
Air consumption per working cycle 10 NL
Dust collection hood diameter 80 mm
Overall dimensions - net weight: 1535x2025x1385 mm
Package dimensions (machine) 1170X1160X1650 mm
Rod packaging size 1500 x 120 x 60 mm
Gross weight 347 KG.
Net weight 315 KG.
 

ACCESSORIES

Ergonomics
Quick-change bush / chuck

By using these quick-change tool-holders, You can mount Your drill-bits on the boring head in just "one click"


CODICE: 36000061

Specific for long panels
1000 mm long fence extension

To increase by 1 mt the length of the 2 standard fences (1,5 mt each) and carry out the in line drilling process on long panels


CODICE: 29970302

Increase the versatility
Set of two ref.stops for drilling at 45° and 90°

To drill mouldings and laths


CODICE: 26000069

Enhance the hold-down on the workpiece
Additional hold-down clamp

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process

N.1 additional hold-down clamp


CODICE: 29971019

Increase the accuracy of the working process
Ref. pin for line drilling

To carry out the line vertical drilling process very quickly and accurately, without using the long fence. It is highly recommended to have this device both sides of the machine to process panels longer than 2 mt

Ref. pin for line drilling (1 piece)


CODICE: 29900100

Enhance the hold-down on the workpiece
Additional hold-down clamps

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process. It allows to process two small panels at a time 

N.2 additional hold-down clamps


CODICE: 29971020

 

ACCESSORIES

Quicker set-up
Ref. gauge for reaf fence parallelism

For a quick and accurate set-up of the rear fence

Ref. gauge for reaf fence parallelism ( 500 mm)


CODICE: 26000061

Quicker set-up
Kit to join the two aluminium fences

To get one single 3mt long fence

Kit to join the two aluminium fences (1500 + 1500 mm)  


CODICE: 26028820

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Grass"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008395

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Blum"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008392

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Hettich"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008393

Quicker set-up
Ref. gauge for the quick set-up of the ref. stops along the fence

For the quick and accurate adjustment of the ref. stops along the fence

Ref. gauge for the quick set-up of the ref. stops along the fence (704 mm)


CODICE: 26000059

 

ACCESSORIES

Quick-drill of hinge holes
Drilling aggregate for hinges type "Salice"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008391

Recommended tools
Tool set made up of 3 drill-bits for hinges

Recommended drill-bit set for drilling aggregate for hinges, made up of n. 2 left-handed drill-bits 8mm diameter and n.1 right-handed drill-bit 35 mm diameter


CODICE: 26845821

Special voltages
Single-phase Motor

To have the machine working in small handcraft shops having an electric system running on 220 Vlts ( option to be specified at the order)


CODICE:

Specific for long panels


CODICE:

Specific for long panels


CODICE:

Technical assistance
day installation and training, all inclusive (EU countries rate)


CODICE: