SINGLE-HEAD BORING MACHINES

BORING SYSTEM 21 TECHNOLOGY

Multispindle, single-head, electronic boring machine, with 3 NC axes

For horizontal and vertical drilling into wood-based panels and solid wood, for the furniture manufacturing.

- Quick, electronic set-up: Click and go!

- Accurate drilling: NC axes (+/- 0,1 mm) and the finest mechanical systems

- Small footprint: 1 sqm

More than 20.000 machines manufactured, over thirty years' experience.
100% made-in-Italy machines abiding by the highest quality standards as a result of  the "Lean" manufacturing process, also known as "Toyota System".

TECHNICAL FEATURES

Quick-change spindles 32 mm interaxis. Electronic selecton of boring height, depth and boring angle from 0° to 90°. Well-dimensioned working table made of steel. Ready to be connected to a  dust-collector. Manufactured according to EC standards.



STANDARD EQUIPMENT

n.1 - 2HP Motor + linear actuator for boring-head tilting

n.2 stepper motors for the vertical and horizontal mouvement of the boring head

n.2 patented safety hold-down clamps

n.5 quick-change chucks

n.2, 1500 mm long, aluminium fences, with 4 ref. stops

n.2 removable side-fences on working table, adjustable on high-precision numeric counters

n.2 fixed ref. stops at 37 mm for hinges

Rear fence having 300 mm max. stroke

Ergonomic control panel, color 7" touch-screen, PLC for the electronic selection of the boring parameters

"Linux" Operative System

Up to 1.000 working programs storable

USB and Ethernet ports for file uploading, on-line assistance and system up-grades 

Package:stackable carton box

Ready to be connected to a dust- collector

Manufactured according to EC standards 





 

MORE INFORMATION

SIMPLE, ELECTRONIC, UNIQUE 

Thanks to the "touch-, icon-based", patented System, for the electronic selection of boring height, depth, boring angle, and feed rate, over a PLC; the set-up is easy and intuitive and it does not require any specific programming skills.

HIGH-QUALITY END PRODUCTS

The high-precision movement of the NC axes, driven by stepper motors and endcoder; as well as the well-balanced and even movement of the boring head, driven by a centered motor and sliding along linear guides and ball bearings, ensure an extremely accurate drilling process, and high-quality end products

QUICK SET-UP : CLICK AND GO!

Electronic selection and saving of the drilling parameters ( Up to 1.000  programs storable ) allow a reduction of the set-up time by 80%, making this machine two times faster than any other single-head boring machine of the same category.

PERFECT PANEL JOINTS

The ref. side fences, adjustable on numeric counters, always represent a precise reference point, quick to set-up, and guarantee perfect parallelism of the drilling operations.  

 

VERSATILE

It drills at any angle between 0° and 90°. The selection of the boring angle is electronic over a touch screen 

SAFE PANEL HOLD-DOWN 

The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process

 

MORE INFORMATION

TOP-OF-THE-RANGE BORING-HEAD

Made of aluminium with internal gears made of rectified steel; well-dimensioned holder plate and centered motor for the highest balance, sliding on guides and sleeve bearings for an even vertical and horizontal movement to give You a top-performance, always!

FAST HORIZONTAL DRILLING

Thanks to the 640 mm interaxis and the large working table, You can process 2 panels having 316 mm width at the same time

FAST VERTICAL DRILLING

You can process 3000 mm - long sides in 5 working cycles

QUICK AND ACCURATE PANEL POSITIONING

Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops,( two are included, two are options) 

QUICK AND ACCURATE PANEL POSITIONING

Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops,( two are included, two are options) 

REAR FENCE

The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence. 

 

MORE INFORMATION

FIXED STOP FOR HINGES

The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.  

SPECIAL DESIGN TO WORK WITH LARGE-DIAMETER DRILL-BITS

The comb has been designed so as to have 3 fixed positons where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.

SOLID STRUCTURE

Made of steel, built to last, eco-friendly, rust-resistant powder coating.

FAST DRILLING OF HINGE HOLES 

You can apply the boring aggregates of the available typologies ( BLUM, HETTICH, SALICE, GRASS) to drill the three hinge holes in one working cycle.

 

DATA SHEET

Spindles N. 21
Left and right spindles N. 10 sx - N. 11 dx
Spindle interaxis 32 mm
Total interaxis 640 mm
Max. tool diameter 35 mm
Max. boring depth 65 mm
Max boring height 35 mm
Height of working table 860 mm
Dimensions of the working table 885 x 349,5 mm
Max. panel thickness (optional*) 60 mm (130 mm *)
Max. panel dimensions 900 x 3000
Motor HP 2 / KW 1,5 - RPM 2800
Stepper motor 1 nema 24, 3.2 Nm, 4.2 A, 800 g/cm^2
Stepper motor 2 nema 34, 4.4 Nm, 5.6 A, 1050 g/cm^2
Linear actuator max 6000 N, 12 mm/s, RPM 5000, max 24 A
Standard pneumatic pressure BAR 6/ 8
Air consumption per working cycle 5 NL
Dust collection hood diameter 80 mm
Overall dimensions - net weight: 1580 x 950 x 1400 mm
Package dimensions (machine) 1140 x 950 x 1060
Rod packaging size 1500 x 120 x 60
Gross weight Kg 370
Net weight Kg 340
 

ACCESSORIES

Improve the comfort
Independent idle-roller table 500x1500 mm

To make the handling of large-size panels easier for the operator 

Independent idle-roller table 500x1500 mm ( idle-roller surface only) 562x1540 mm (incl.frame), adjustable height from 770 to 1.175 mm, max. capacity 45 Kg/m. It can be installed both sides of the machine


CODICE: 27304100

Ergonomics
Quick-change bush / chuck

By using these quick-change tool-holders, You can mount Your drill-bits on the boring head in just "one click"


CODICE: 36000061

Ergonomics
Tool-tray

To keep Your drill-bits and tools tidy and always close at hand


CODICE: 26000014

Ergonomics
Stand for the long fences

To keep Your fences always close at hand


CODICE: 26000010

Specific for long panels
Ref. stops to match the long panel

It keeps long working panels aligned for a more accurate drilling process

N. 2 ref. stops to match the long panel during transversal drilling


CODICE: 26001071

Specific for long panels
1000 mm long fence extension

To increase by 1 mt the length of the 2 standard fences (1,5 mt each) and carry out the in line drilling process on long panels


CODICE: 29970302

 

ACCESSORIES

Increase the versatility
Blocks to lift the hold-down clamps up to 130 mm

To process beams having a maximum height of 130 mm


CODICE: 26001015

Increase the versatility
Set of two ref.stops for drilling at 45° and 90°

To drill mouldings and laths


CODICE: 26000069 A / 26000069 B

Quicker set-up
Set of n° 2 additional ref. stops

For an even quicker and more accurate set up


CODICE: 26028819

Enhance the hold-down on the workpiece
Additional hold-down clamp

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process

N.1 additional hold-down clamp


CODICE: 29971019

Enhance the hold-down on the workpiece
Additional hold-down clamps

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process. It allows to process two small panels at a time 

N.2 additional hold-down clamps


CODICE: 29971020

Quicker set-up
Ref. gauge for reaf fence parallelism

For a quick and accurate set-up of the rear fence

Ref. gauge for reaf fence parallelism ( 500 mm)


CODICE: 26000061

 

ACCESSORIES

Quicker set-up
Kit to join the two aluminium fences

To get one single 3mt long fence

Kit to join the two aluminium fences (1500 + 1500 mm)  


CODICE: 26028820

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Grass"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008395

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Salice"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008391

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Blum"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008392

Quick-drill of hinge holes
Drilling aggregate for hinges, type "Hettich"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED


CODICE: 00008393

Recommended tools
Tool set made up of 3 drill-bits for hinges

Recommended drill-bit set for drilling aggregate for hinges, made up of n. 2 left-handed drill-bits 8mm diameter and n.1 right-handed drill-bit 35 mm diameter

Tool set made up of 3 drill-bits for hinges


CODICE: 26845821

 

ACCESSORIES

Recommended tools
Recommended drill-bit set

A selection of drill-bits by our technicians for a professional approach


CODICE: 26054750

Ergonomics
Kit of n° 2 stands for the side fences

To keep side fences always close at hand


CODICE: 26000012

Special voltages
Single-phase Motor

To have the machine working in small handcraft shops having an electric system running on 220 Vlts ( option to be specified at the order)


CODICE:

Special voltages
"CSA" standards

Electrical standards abiding by the Canadian wiring regulations ( option to be specified at the order)


CODICE:

Increase the accuracy of the working process
Ref. pin for line drilling

To carry out the line vertical drilling process very quickly and accurately, without using the long fence. It is highly recommended to have this device both sides of the machine to process panels longer than 2 mt.

Ref. pin for line drilling (1 piece)


CODICE: 26229020 - (left) / 26229024 (right)

Quicker set-up
Save time
Macro "Cabineo"

A click is all You need to drill the holes for the "Cabineo" connectors, in one working cycle.


CODICE: 26229021